See video to connect your central vacuum to Nadair smart app
The on-off switch to start and stop your vacuum is on the hose handle. There is a 3-second delay before the unit shuts down completely.
Yes, Our hoses are compatible with most inlet, and you can order the super valve converter so it can fit in your 2 (Two) pin wall valve
See the document below that explains when your LED light will change, what it means, and what action should be taking.
This happens when the vacuum is not well hung.
Please, look at this document to see how it should be hung properly.
If your unit doesn’t start or stop, please look at this document to see the possible problem.
This must be because the piping installation was reversed.
Please refer to this document to know how the piping must be installed.
If your unit surges, you must follow these steps to find the problem.
Refer to this document to know the steps to fix the problem.
Refer to this document for the step to follow to reset your PC board
IT’S NORMAL; there is always a gap because it takes space so that the piping is not too narrow in the air intake to avoid any damage.
Please refer to this document for more explanation.
The LED indicator light keeps you aware of the statue of the unit.
See document for color meaning.
Yes, the vacuums are compatible with certified 2’’ standard piping systems F2158.
If the piping network is not a 2” standard piping system, a pipe reducer may be required to adjust to different size pipping.
To know how to do a vacuum bypass, please refer to this document.
The soft-Start/stop Technology is accomplish form the electronic module of the vacuum.
No, this kit is made for hard surfaces. If you are looking for a kit that cleans rugs, I invite you to look at our electrical kits. You can find them on our web site in the attachment kit section
This kit works with low-voltage. Inside your wall inlets, you must have 2 low-voltage pins in order to have the on-off switch to work
The compatibility is mostly with the inlets. If your inlets are 1.5” inner diameter and have 2 low-voltage pins inside, The hose should fit and the on-off should work. But to be 100% sure, we invite you to send us a picture of the inside of your inlets and a picture of you actual unit and installation at service@nadair.com and our customer support will be happy to confirm compatibility for you.
No the hose cover will leave no mark on your woodwork corners.
Our central vacuum can be plugged in standard 110-120v electrical Outlet. They work on 15 amps non dedicated breaker.
Service At 500hrs is to be sure to protect your motor by changing the carbon brushes. To be noted that at 500 hours the vacuum will not stop. But if it continues without service, it will burn out the motor if the carbon brushes aren’t changedWhen the light will be red it means the carbon brushes will be more than finished and will start degrading the motor.But before this happen, the orange light will warn you to change the carbon brushes, which you can do easily at home.Changing the carbon brushes will make your unit good for another 500 hours of use.
You can buy the hose extension. It will give you an extra 15ft of length.
Yes, Our hoses are compatible with most inlet
and you can order the super valve converter so it can fit in your 2 pin wall valve by contacting us at info@nadair.com or 1 (800) 776-7891.
Yes, the vacuums are compatible with certified 2’’ standard piping systems F2158.
If the piping network is not a 2” standard piping system, a pipe reducer may be required to adjust to different size pipping.